A door that stops short of fully closing, or closes but doesn't sit flush, usually points to alignment or an obstruction rather than a broken part.
A door that doesn't fully close can't lock properly, which is a real security gap, not just an inconvenience.
Most cases resolve with track cleaning and roller height adjustment. If the frame has shifted, a full alignment service re-levels the panel.
The door closes partway but won't reach fully shut, different from a door that closes completely but won't lock.
Don't slam it repeatedly trying to force it shut, this can crack the frame or knock the panel further out of alignment.
Slamming a door that won't close fully often makes the alignment worse, since it's usually hitting an obstruction or misaligned track.
Cost: $150-$300 depending on whether it's alignment or an obstruction.
Time: 30-60 minutes typically.
Repair, usually alignment or clearing an obstruction.
Frame settling is more common in Florida's sandy soil conditions, which can shift the opening over time.
Often yes, but sometimes it's debris in the track. We check both during diagnosis.
Yes, run your hand along the track for debris before assuming it's a bigger mechanical issue.
Get a free quote, we diagnose the exact cause before quoting a fix.